Build an Interactive Voice Response with Go
Published on February 11, 2021

In past tutorials, we learned how to make and receive voice calls with Go. This tutorial will show you how to build an interactive voice response system using Go and the Voice API.

We will build a server that responds to the webhook endpoint Vonage sends when a call comes in. Using a Vonage application with voice capabilities, we'll route incoming voice calls to their destination. Finally, we'll instruct the API to request a user give some input on the call and then, using Text-To-Speech, relay the input back to them.

Prerequisites

To follow along with this tutorial, you need the following:

Vonage API Account

To complete this tutorial, you will need a Vonage API account. If you don’t have one already, you can sign up today and start building with free credit. Once you have an account, you can find your API Key and API Secret at the top of the Vonage API Dashboard.

This tutorial also uses a virtual phone number. To purchase one, go to Numbers > Buy Numbers and search for one that meets your needs.

Install Go SDK

This project will be using Vonage's Go SDK, which you can install with the following command:

go get github.com/vonage/vonage-go-sdk

Write the Code

Vonage checks whether you have configured a webhook to route your voice call to when it receives one on your virtual number. This webhook configuration is specific to your application, which you will create and configure later in the tutorial.

Let's write the code that will handle any requests to this webhook. First, create a file called handle-user-input-with-dtmf.go and copy the following into this file:

package main



import (
    "encoding/json"
    "io/ioutil"
    "log"
    "net/http"

    "github.com/vonage/vonage-go-sdk/ncco"
)



type Dtmf struct {
    Digits    string
    Timed_out bool
}



type Response struct {
    Speech            []string
    Dtmf              Dtmf
    From              string
    To                string
    Uuid              string
    Conversation_uuid string
    Timestamp         string
}



func main() {



}

The above code imports libraries we'll use throughout this tutorial, we also create two new structs that will handle the input from webhook requests received from Vonage. Following this we've initialized our project with a main() function.

Next, we're going to need to create a /webhooks/answer webhook endpoint to instruct Vonage APIs what to do with any incoming calls. To do this, we'll need to create a Call Control Object (NCCO) first asking the caller input any key, and then the next step is to record the callers input. Add the code below to your project above the main() function:

func answer(w http.ResponseWriter, req *http.Request) {
    MyNcco := ncco.Ncco{}

    talk := ncco.TalkAction{Text: "Hello please press any key to continue."}
    MyNcco.AddAction(talk)

    inputAction := ncco.InputAction{EventUrl: []string{"https://demo.ngrok.io/webhooks/dtmf"}, Dtmf: &ncco.DtmfInput{MaxDigits: 1}}
    MyNcco.AddAction(inputAction)

    data, _ := json.Marshal(MyNcco)

    w.Header().Set("Content-Type", "application/json")
    w.Write(data)
}

The project doesn't currently have any functionality to know what to do with the caller's input (you may have noticed the URL https://demo.ngrok.io/webhooks/dtmf in the previous step). We'll need to create this endpoint in our project, this endpoint will need to read the body of the POST request, and then read back the key the caller submitted in the previous step. Add the code example below to your project:

func dtmf(w http.ResponseWriter, r *http.Request) {
    data, _ := ioutil.ReadAll(r.Body)
    var t Response
    json.Unmarshal(data, &t)

    MyNcco := ncco.Ncco{}
    talk := ncco.TalkAction{Text: "You pressed " + t.Dtmf.Digits + ", Goodbye"}
    MyNcco.AddAction(talk)

    responseData, _ := json.Marshal(MyNcco)
    w.Header().Set("Content-Type", "application/json")
    w.Write(responseData)
}

It's time to instruct the main() function to know what to do with these two new functions we've created. We need to create an http server to listen on port 3000, and route two endpoints to those functions. Add the three lines below to your empty main() function.

http.HandleFunc("/webhooks/answer", answer)
    http.HandleFunc("/webhooks/dtmf", dtmf)

    http.ListenAndServe(":3000", nil)

Expose the Project To the Internet

When a phone call comes in, Vonage will send an HTTP request to your preconfigured webhook URL. Your Go application should be accessible to the internet to receive it, so we recommend using Ngrok.

Launch Ngrok with the following command:

ngrok http 3000

Copy the HTTPS URL that ngrok uses, as you will need this later. It will be similar to the example below:

https://abc1234.ngrok.io -> http://localhost:8080

Note This URL will be different every time you run the command if you're using the free plan. So you will have to update your application in the Dashboard each time you run the command.

In your handle-user-input-with-dtmf.go file, find the line inputAction := ncco.InputAction{EventUrl: []string{"https://demo.ngrok.io/webhooks/dtmf"}, within the answer() function and replace "https://demo.ngrok.io" with your ngrok URL. Remember to keep the /webhooks/dtmf part though.

Configure the Settings

Create an application in your Dashboard under "Your Applications". Give your new application a name.

Add Voice capabilities to the application and configure the URLs using the Ngrok URL you copied earlier. For the Answer URL, use [paste ngrok url]/webhooks/answer and for the Event URL [paste ngrok url]/webhooks/event.

Now, click the Link button next to your recently purchased Vonage virtual number to link your new application to the phone number.

You've purchased a Vonage virtual number, created a Vonage Application, and written the code to handle the webhook events. It's time to test your project!

Time to Test

We have configured our Vonage application and phone number to know how to handle inbound voice calls. We have also written a webhook inside handle-user-input-with-dtmf.go to handle any inbound call requests. Finally, we've added another endpoint that we will trigger once the caller has selected a key from their phone.

Now it's time to test this application. When you run the command below, it will start a web server with this webhook listening for the request. So run the command below to start testing our new application:

go run handle-user-input-with-dtmf.go

When you call your virtual number, you will hear the words quoted back to you "Hello please press any key to continue.". Once you hear this sentence, press any of the keys on your phone. Once entered, your call is redirected to the /webhooks/dtmf webhook URL, which will read what you input with the sentence: "You pressed [key here] Goodbye". Replacing [key here] with whatever key you entered.

Further Reading

You can find the code shown in this tutorial on the Go code snippets repository.

Below are a few other tutorials we've written about using our services with Go:

If you have any questions, advice or ideas you'd like to share with the community, please feel free to jump on our Community Slack workspace. I'd love to hear back from anyone that has implemented this tutorial and how your project works.

Greg HolmesVonage Alumni

Former Developer Educator @Vonage. Coming from a PHP background, but not restricted to one language. An avid gamer and a Raspberry pi enthusiast. Often found bouldering at indoor climbing venues.

Ready to start building?

Experience seamless connectivity, real-time messaging, and crystal-clear voice and video calls-all at your fingertips.

Subscribe to Our Developer Newsletter

Subscribe to our monthly newsletter to receive our latest updates on tutorials, releases, and events. No spam.